General Macro Listening

Home >> Macros >> General Login / Register

Achievement/Questtracker reset

Removes all Achievement and Quests you track with one click.

/run for i=1,GetNumQuestWatches() do RemoveQuestWatch(GetQuestIndexForWatch(i));end local tracked={GetTrackedAchievements()} for i=1,#tracked do RemoveTrackedAchievement(tracked[i]);end

Direct link to this macro:
http://www.wowuse.com/macros/general/achievementquesttracker-reset/14/

Archelogy - Completed Artifacts Counter

Shows you how many artifacts you have completed for each race. You need to open your Completed Artifacts first once, then use this macro.

/run print("Total artifacts"); for x=1,9 do local c=GetNumArtifactsByRace(x); local a =0; for y=1,c do local t = select(9, GetArtifactInfoByRace(x, y)); a=a+t;end local rn = GetArchaeologyRaceInfo(x); if( c > 1 ) then print(rn .. ": " .. a); end end

Direct link to this macro:
http://www.wowuse.com/macros/general/archelogy-completed-artifacts-counter/25/

Archelogy auto mount after survey

You only need to run this once and it works till you relog or reload the ui.

Every time you finish to cast a survey you will be automatic mounted, saving you quite some clicks, if you found a fragment just move a bit before the cast finish to prevent the mounting.

Replace <mount number> with the index of the mount you wanna use, for the right number go on your mount tab and the index start with 1 and goes from left to right so the one right to the first is 2 and so on.

/run local f=CreateFrame("frame");f:SetScript("OnEvent",function(s,e,a,b) if(a=="player" and b=="Survey") then CallCompanion("MOUNT",<mount number>) end;end);f:RegisterEvent("UNIT_SPELLCAST_SUCCEEDED");

Direct link to this macro:
http://www.wowuse.com/macros/general/archelogy-auto-mount-after-survey/6/

Auction house incoming gold

Prints out in the default chat frame how much gold you will get from currently sold auctions.

You need to have the auction house frame open.

/run local z=0;for i=1,GetNumAuctionItems("owner") do local _,_,_,_,_,_,_,_,_,a,_,_,b=GetAuctionItemInfo("owner",i);if(b==1)then z=z+a;end end print(GetCoinTextureString(z));

Direct link to this macro:
http://www.wowuse.com/macros/general/auction-house-incoming-gold/37/

Cast different spells based on current spec

Use spell 1 with talent spec 1 and spell 2 with talent spec 2

#showtooltip
/cast [spec:1] <spell 1> [spec:2] <spell 2>

Direct link to this macro:
http://www.wowuse.com/macros/general/cast-different-spells-based-on-current-spec/41/

Chat tab switching

Switch through all chat tabs, but its does it after numbers if you are on tab 3 it goes to tab 4 tab 5 etc but the sorting can look like that the tab next to 3 is tab 5 and the tab next to is tab 4.

If that is a problem, you can always change the tab position to fit the right order.

/run for i=1,#CHAT_FRAMES do local e=_G["ChatFrame"..i.."Tab"];if(e:IsVisible() and e:GetID()>SELECTED_CHAT_FRAME:GetID()) then FCF_Tab_OnClick(e,nil);return;end end FCF_Tab_OnClick(ChatFrame1Tab,nil);

Direct link to this macro:
http://www.wowuse.com/macros/general/chat-tab-switching/10/

Healing with mouseover

A basic macro to heal with mouseover.
It casts heal on mouseover if it is help, if you press alt it will on the target of your target if it is help, otherwise it casts normal on your current target or selfheal if it is on auto and you dont have a target.

The target of target part is in there if you need to heal fast a target which the mob currently target.

#showtooltip
/cast [@mouseover,help] <heal spell>;[modifier:alt,@targettarget,help] <heal spell>; <heal spell>

Direct link to this macro:
http://www.wowuse.com/macros/general/healing-with-mouseover/17/

Itemlevel

Gets the average itemlevel of your target and prints it in the default chat frame.

/ins
/run local t,c,u,k=0,0,UnitExists("target")and"target"or"player"for i=1,18 do k=GetInventoryItemLink(u,i)if i~=4 and k then t=t+select(4,GetItemInfo(k))c=c+1 end end c=c>0 and print(t/c)

Direct link to this macro:
http://www.wowuse.com/macros/general/itemlevel/15/

Language toggle

Allows you toggle your language if you play a race with having a 2nd one next to the common language.

/run if( ChatFrame1.editBox.language==GetLanguageByIndex(1))then ChatFrame1.editBox.language=GetLanguageByIndex(2)else ChatFrame1.editBox.language=GetLanguageByIndex(1) end;

Direct link to this macro:
http://www.wowuse.com/macros/general/language-toggle/11/

Loot a Rang

To safe the actionbar button and have it easier to loot a mob, just put the following in one of your normal macros.

Use it when the mouse is over a dead enemy, but attention it will be also used when there is no loot in the mob.

/use [@mouseover,harm,dead] Loot-A-Rang

Direct link to this macro:
http://www.wowuse.com/macros/general/loot-a-rang/9/

Mailbox put same items in

This macro puts all same items into the send mail window, just hover over the item in the bags and press the macro.

Attention you must be on the Inbox tab, because the Send Mail one dont allow to press a macro, when done change to the Send Mail tab and items will be there.

/run local I,n=1;for i=1,12 do I=I+(GetSendMailItem(i)and 1 or 0)i,n=GameTooltip:GetItem()n=n:match"Hitem:%d+:"end for b=0,4 do for s=1,32 do if(GetContainerItemLink(b,s)or""):find(n)then PickupContainerItem(b,s)ClickSendMailItemButton(I)I=I+1 end end end

Direct link to this macro:
http://www.wowuse.com/macros/general/mailbox-put-same-items-in/5/

Mount macro 1 button

description to come

/stopmacro [mounted]
/run UIErrorsFrame:UnregisterEvent("UI_ERROR_MESSAGE")
/cast Abyssal Seahorse
/cast <flying mount>
/cast <ground mount>
/run UIErrorsFrame:RegisterEvent("UI_ERROR_MESSAGE")

Direct link to this macro:
http://www.wowuse.com/macros/general/mount-macro-1-button/26/

Player coordinates

Not using a addon showing coordinates and need to know your current, just execute this macro.

/run local x,y=GetPlayerMapPosition("player"); print(GetZoneText()..":"..(x*100)..","..(y*100));

Direct link to this macro:
http://www.wowuse.com/macros/general/player-coordinates/22/

Target nearest enemy

Target the nearest enemy if you don't have a target

/targetenemy [@target, noexists]

Direct link to this macro:
http://www.wowuse.com/macros/general/target-nearest-enemy/39/

Toggle showing of cloak

Shows your cloak if not shown otherwise hide it.

/run ShowCloak(1-(ShowingCloak() or 0))

Direct link to this macro:
http://www.wowuse.com/macros/general/toggle-showing-of-cloak/35/

Toggle showing of helm

Shows your helm if not shown otherwise hide it.

/run ShowHelm(1-(ShowingHelm() or 0))

Direct link to this macro:
http://www.wowuse.com/macros/general/toggle-showing-of-helm/34/

Whisper your mouseover target

If you have a mouseover target it will whisper him/her the text you define.

Just replace <Your Text>, with the text you wanna whisper.

/run if not UnitExists("mouseover") then return end;  SendChatMessage("<Your text>","WHISPER",nil,UnitName("mouseover"));

Direct link to this macro:
http://www.wowuse.com/macros/general/whisper-your-mouseover-target/30/

Who in current zone

Does a who request for the zone you are currently in.

/run SendWho("z-"..GetRealZoneText())

Direct link to this macro:
http://www.wowuse.com/macros/general/who-in-current-zone/33/

Macro Index

Achievement/Questtracker reset
Archelogy - Completed Artifacts Counter
Archelogy auto mount after survey
Auction house incoming gold
Cast different spells based on current spec
Chat tab switching
Healing with mouseover
Itemlevel
Language toggle
Loot a Rang
Mailbox put same items in
Mount macro 1 button
Player coordinates
Target nearest enemy
Toggle showing of cloak
Toggle showing of helm
Whisper your mouseover target
Who in current zone